QM BenchQuality engineering tools

Fase Control DMAIC: lista de cierre y entrega

Revise si un proyecto de mejora puede cerrarse y el proceso queda bajo control. ↓

  1. 1Ingresar datos
  2. 2Leer el veredicto
  3. 3Descargar el reporte PDF

Nota: la interfaz de la herramienta está por ahora en inglés; la versión en español llegará pronto.

Empty template

Fill in the form below, or load the sample to see a complete example and replace it with your own data.

  1. 1Enter or paste dataor click Load sample
  2. 2Read the verdictcharts and key figures
  3. 3Download the PDFwith your logo
Saved in this browser

Click OK, NOK or N/A for each item. A NOK opens fields for the finding and the immediate reaction.

Result

  • C1

    The project metric is at or better than the target for an agreed period (for example 4 to 8 weeks), shown with data.

  • C2

    The improvement is statistically confirmed (before / after test or a shifted control chart), not only visible in a few points.

  • C3

    The savings are confirmed by finance or controlling, separated into hard and soft savings.

Process control

  • C4

    The control plan includes the new or changed characteristics, process settings, methods, frequencies and reaction plans.

  • C5

    The key input or output is monitored with a control chart or an equivalent check, and out-of-control signals have a reaction.

  • C6

    Error-proofing or fixed settings replace the old reliance on attention wherever possible.

  • C7

    The PFMEA is updated with the verified causes and the new controls.

  • C8

    The measurement system for the controlled characteristics is validated (Gage R&R or attribute study).

Standards and people

  • C9

    Work instructions and standardised work describe the new method, at the station, in the current revision.

  • C10

    All shifts and stand-in operators are trained on the new method, with records.

  • C11

    The new standard is part of the layered process audit or the regular checks.

Handover and closure

  • C12

    The process owner has accepted the handover and knows the control plan, the monitoring and the reaction plan.

  • C13

    Open actions are listed with owner and due date and handed over.

  • C14

    Lessons learned are recorded and the solution is checked for transfer to similar processes and products.

  • C15

    The sponsor has signed off the project closure.

Photos (evidence)

Dónde encaja esta herramienta

Lista de la fase Control

Quince puntos para el tollgate de Control. Cada punto abierto pide hueco, acción, responsable y fecha.

01Cómo funciona

El resultado es el porcentaje de puntos aplicables en OK, por sección y total.

02Cuándo usarla

Úsela dos a cuatro semanas antes del cierre planeado.

Reporte PDF en un clic

PDF con resultado, puntos abiertos con acciones y la lista completa.

Privado: todo se ejecuta en su navegador

Todo se calcula y se guarda en su navegador. Nada se sube a ningún servidor; sin registro y sin instalación.

Cómo usar la lista

  • Revísela con el equipo dos a cuatro semanas antes del cierre.
  • Califique cada punto con evidencia.
  • Planee los puntos abiertos con responsable y fecha.
  • Cierre con el sponsor cuando todo esté OK.

Qué revisa

Quince puntos: resultado confirmado con datos y ahorros validados, control del proceso (plan de control, cartas, poka-yoke, AMEF, sistema de medición), estándares y capacitación, y entrega al dueño del proceso con la firma del sponsor. Actualice el plan de control.

Preguntas frecuentes

¿Para qué sirve la fase Control?

Para que la mejora se mantenga: plan de control, monitoreo, estándares y un dueño del proceso.

¿Cuánto tiempo confirmar?

Normalmente cuatro a ocho semanas de datos.

¿Quién cierra el proyecto?

El sponsor en el tollgate de Control.