Spaghetti diagram and walking distance calculator
Place the station, racks, shelves and machines of an area on a floor plan in metres, list the walks of one cycle, and get the metres per cycle, kilometres per shift and minutes of walking per shift.
Copy the layout and move the places to compare a new arrangement with today: the spaghetti diagrams side by side and the reduction in percent.
Worked example: Spaghetti Diagram and Walking Distance
- 01Places5x / y in metres
- 02Walks8 per cyclesome every 2nd cycle
- 03Todaym per cyclekm per shift
- 04New layoutshorterpoint of use
01Method
Distances are straight lines between the coordinates. Metres per cycle = Σ distance × times per cycle; per shift = metres per cycle × cycles; minutes = metres ÷ walking speed.
PDF report in one click
Export a PDF with the diagrams and the walk table.
Private: runs in your browser
All data stays in your browser. Nothing is uploaded and no account is needed.
How to use it
- Mark the places: station, racks, shelves, carts, test benches, with x and y in metres.
- List the walks of one cycle and how often each happens per cycle.
- Enter cycles per shift to get kilometres and minutes per shift.
- Copy the layout and move the places to test a new arrangement.
Fix the new places with 5S and check the cycle with the combination sheet. Read about the eight wastes.
Frequently asked questions
›What is a spaghetti diagram?
A drawing of the paths a person or a part takes through an area. With many lines it looks like spaghetti and makes walking and transport waste visible at a glance.
›How do I measure the positions?
Take a floor plan or pace the distances, set one corner as x = 0, y = 0 and give each place its coordinates in metres. Straight-line distances underestimate real paths around obstacles a little.
›How fast do people walk at work?
About 1 metre per second when carrying parts, up to 1.3 m/s without. Use the value you observe.
›What does walking cost?
At 400 cycles a shift, 10 metres per cycle are 4 km and about 70 minutes of walking per shift, per operator. Moving parts to the point of use often saves more than any technical measure.